Strip Accumulators
Installed between shear & end welder and forming mill, horizontal
spiral accumulator store a large amount of strip in a reasonable
footprint space to give enough time for shear & end welder to cut
and join the ends of two successive coils with non-stop tube mill.
The principle of operation is simple. The strip is fed into the
accumulator by a set of pinch rolls, before that, the strip is
twisted 90 degree for entering the pinch rolls. The accumulator is
designed for strip to outside feeding and center output. The number
of strip wrap can be fixed or variable, depending on the thickness
and width of material.
Spiral horizontal accumulator include
1.Low turnover bracket. Consisted of bracket,horizontal roller and
vertical roller.
2.Angel adjusttable flip bracket. Consisted of support frame,angel
control borad,adjusttable roller and stop roller.
3.Leveling and feeding machine. Adopt two shaft pinching
type,consisted of transmission part,pinch part,stop roller part and
base part.
4.Horizontal spiral accumulator.Used to store material and drive
steel strip,consisted of drive part,inner part,neutral roller
part,horizontal roller part,outer ring roller part and feeding in
roller frame part.
5.High turnover bracket.Consisted of high bracket,horizontal roller
and vertical roller.
6.Electric controlling box.Made of controller cabinet,safety
protection,e-stop button.
technical parameters:
. | Model | Steel Strip Width | Steel Strip Thickness | Feeding Speed(m/min) | Length(m) | Motor(KW) |
1 | φ2.5M | 60~180mm | 0.5~2.0mm | 160 | 15 | 7.5 |
2 | φ3.5M | 60~230mm | 0.8~2.5mm | 160 | 15 | 7.5 |
3 | φ4.0M | 60~350mm | 0.8~3.0mm | 160 | 18 | 11 |
4 | φ4.2M | 80~400mm | 0.8~3.5mm | 160 | 18 | 15 |
5 | φ4.5M | 100~400mm | 0.8~4.0mm | 160 | 18 | 18.5 |
6 | φ4.8M | 100~450mm | 1.0~4.5mm | 160 | 18 | 18.5 |
7 | φ5.0M | 120~500mm | 1.0~5.0mm | 160 | 23 | 22 |
8 | φ5.5M | 150~600mm | 1.0~5.5mm | 160 | 23 | 30 |
9 | φ6.0M | 180~700mm | 1.2~6.0mm | 160 | 23 | 30 |
10 | φ8.0M | 200~800mm | 1.5~8.0mm | 120 | 43 | 55 |
11 | φ10M | 300~800mm | 2.0~10.0mm | 120 | 43 | 75 |
12 | φ12M | 500~900mm | 5.0~12.0mm | 100 | 48 | 110 |
13 | φ14M | 500~900mm | 5.0~14.0mm | 100 | 48 | 132 |
14 | φ16M | 500~1000mm | 6.0~16.0mm | 100 | 55 | 160 |
Remarks | We can design according to the customer's demand, please feel free
to contact us if you have any questions! |
FAQ
Q: Are you a manufacturer?
A: Yes, we are a manufacturer. We have 4 factories ( Machining,
Assembling, Heat treatment, and Moulding ). We also have our own
R&D department. Welcome to visit us.
Q: What kind of payment term do you do?
A: We do T/T and L/C.
Q: What info do you need before giving me the price and proposal?
A: Since we design individual machines based on our customer's
requirements, we need your desired products' basic dimensions,
including all the pipe diameter(or tube length), thickness range,
usage, raw material steel grade, coil weight, and degree of
automation.
Q: What should I do if I just start a new business?
A: Contact us immediately, we provide a free consultant for
pre-sales service. Also, we can help you solve the raw material
(steel coil) purchase, worker training, international market price,
and more.
Q: How do you do QA?
A: We have a special team to do strict QA, this is one of our
strengths:
(1)Every gearbox will be tested for 8 hours with oil inside to
guarantee there is no leak.
(2)Every shaft will be inspected for centering jumpiness.
(3)Every roller will be checked to make sure it's in the range of
tolerance critical parts will be inspected for all dimensions.
Q: Why I should choose you? what are the differences between you
and other Chinese suppliers?
A: We are concentrating on pipe-making machines for more than 20
years. We have constructed many steady trading partners in Asia,
Africa, the Middle East, Europe, and South America throughout the
years.
