High automation High-efficiency High quality Suitable for different shapes and sizes pipe stack steel pipe into 6 or 4 angles, and bundle automatically. It
runs stably without manual operation.
Meanwhile, eliminate the noise and knocking off the shock of steel
pipes. Our packing line can improve your pipe's quality and
production efficiency, reduce cost, as well as eliminate a
potential safety hazard.
1. Overview
This auto packing machine is mainly used for square, rectangular,
and round tube products with a wall thickness of 1.0-5.0mm. The
square and rectangular tube is fully automatic stacking without
manual assistance, and the round tube needs manual assistance. It
can work 24 hours without interruption and can satisfy the
continuous product operation with the highest speed of 100 meters
per minute (different speeds of different pipe diameters).
2. Main parameters
Auto stacking machine is suitable for the finished square and
rectangular pipes of 20mm-60mm, round pipes of 32mm-76mm. The
finished pipe wall thickness is 1.0-5.0mm.
The machine is suitable for the forming speed of square and
rectangular pipes of 10-100m/min, round pipes of 10-60m/min. The
packing speed is less than or equal to 10pieces/min. (Max speed is
for 6m square and rectangular pipes).
The machine is suitable for the length of 6-12m packing.
Electrical control is automatic control.
3. Machine configurations
Air source: not less than 5KG
Driving motor reducer: 1.5KW, 10sets
Electrical lifting: 2.2KW, 2sets
Operation table: 1set
4. Machine flow
It has a stepping pipe conveying part, pipe arranging part, lifting
part, pushing part, package coming out part, and storage part.
The pipe running out part: Flying saw cuts steel pipe with a fixed
length, conveys it in place by rollers, and pushes it flatly and
come down stably.
1. Pipe conveying part: to convey the pipes to pipe arrangement
platform, and finish 3-time water blowing actions.
2. Pipe arranging part: main machine part counts the pipe numbers,
and as per the program required number to arrange the pipes as a
row.
3. Lifting part: according to the set layers, arrange the pipes to
be a package.
4. Pushing part: to push the packed pipes flatly.
5. Package coming out part: to convey the finished pipe package
automatically to the manual packing part. Package conveying
platform, 2sets.
6. Package storage part: arrange the packed pipe package tightly
and wait for conveying to other places. (3 groups)
7. Electrical automatic control part: control the auto pipe
conveying, counting, stacking, and coming out, including PLC
computer, touch screen, frequency controller, electrical sensors,
gas distribution, circuit distribution, operation station,
etc...
Technical data:
Item data | GG200 | GG400 | GG600 | GG800 | GG1000 |
Product length | 1000-6000mm | 1500-6000mm | 2000-9000mm | 2000-9000mm | 2000-9000mm |
Max OD | 200mm | 400 mm | 600 mm | 800 mm | 1000 mm |
Loading | 200kg | 1000kg | 1500kg | 3000kg | 4000kg |
Ring speed | 100/min | 90/min | 70/min | 60/min | 50/min |
Conveying mode | Roller or belt | Roller or belt | Roller or belt | Roller or shelf | Roller or shelf |
Conveyor length | 6000mmx2 or according to the requirement | 6000mmx2 or according to the requirement | 9000mmx2 or according to the requirement | 9000mmx2 or according to the requirement | 9000mmx2 or according to the requirement |
Convey speed | 6-12m/min | 6-12m/min | 8-12m/min | 8-12m/min | 5-10m/min |
Wrapping material | Compound paper tape/ woven belt//stretch film/ non-woven fabrics
etc | Compound paper tape/ woven belt//stretch film/ non-woven fabrics
etc | Compound paper tape/ woven belt//stretch film/ non-woven fabrics
etc | Compound paper tape/ woven belt//stretch film/ non-woven fabrics
etc | Compound paper tape/ woven belt//stretch film/ non-woven fabrics
etc |
Wrapping material size | Width: 60-100mm OD:200mm ID: 55mm | Width: 150-200mm OD:250mm ID:55mm | Width: 150-200mm OD:300mm ID:55mm | Width: 200-300mm OD:400mm ID:55mm | Width: 300mm OD:400mm ID:55mm |
Power output | 1.2kw | 2.5kw | 4kw | 9kw | 12kw |
Power voltage | AC/380V/3 Phase 5 line | AC/380V/3 Phase 5 line | AC/380V/3 Phase 5 line | AC/380V/3 Phase 5 line | AC/380V/3 Phase 5 line |
FAQ
Q: Are you a manufacturer?
A: Yes, we are a manufacturer. We have 4 factories ( Machining,
Assembling, Heat treatment, and Moulding ). We also have our own
R&D department. Welcome to visit us.
Q: What kind of payment term do you do?
A: We do T/T.
Q: What info do you need before giving me the price and proposal?
A: Since we design individual machines based on our customer's
requirement, we need your desired products' basic dimensions,
including all the pipe diameter(or tube length), thickness range,
usage, raw material steel grade, coil weight, and degree of
automation.
Q: What should I do if I just start a new business?
A: Contact us immediately, we provide a free consultant for
pre-sales service. Also, we can help you solve the raw material
(steel coil) purchase, worker training, international market price,
and more.
Q: How do you do QA?
A:We have a special team to do strict QA, this is one of our
strengths:
(1)Every gearbox will be tested for 8 hours with oil inside to
guarantee there is no leak.
(2)Every shaft will be inspected for centering jumpiness.
(3)Every roller will be checked to make sure it is in the range of
tolerance critical parts will be inspected for all dimensions.
Q: Why I should choose you? what are the differences between you
and other Chinese suppliers?
A: We are concentrating on pipe-making machines for more than 20
years. We have constructed many steady trading partners in Asia,
Africa, the middle east, Europe, and South America throughout the
years. Our innovative designed production line and every single
unit of the production line are economical and practical.
